holocron/plugins/kyberforge/docs/hooks.md

# Hooks

Reference for this plugin's hook definitions: where to edit them, what apm does with them, and what
the host ends up reading.

## Where to edit

Author hooks in `plugins/kyberforge/.apm/hooks/*.json`. `.apm/` is the only content source and
`apm install` is the only supported install path (ADR-0024) — there is no generated mirror at the
plugin root and no per-plugin `plugin.json`, so `.apm/hooks/` is both where you edit and what ships.

apm merges every `*.json` in that directory into a single hook definition and writes the event
bindings into the consuming project's `.claude/settings.json`; see "Deployed shape" below. Scripts a
hook invokes live in the same directory, alongside the JSON that references them.

## Hook file structure

The shape Claude Code reads, and therefore the shape to author under `.apm/hooks/`:

```json
{
  "hooks": {
    "PostToolUse": [
      {
        "matcher": "Bash",
        "hooks": [
          { "type": "command", "command": "echo 'tool used'" }
        ]
      }
    ]
  }
}
```

Events (**partial list**): `PreToolUse`, `PostToolUse`, `Notification`, `Stop`, and `SessionStart`
(verified end-to-end by the hook below). Claude Code's plugin hook set is larger — `SessionEnd`,
`UserPromptSubmit`, `PreCompact` and `SubagentStop` also exist — and this repo's vendored corpus does
not enumerate it anywhere: `docs/research/docs/claude-code-plugins/configuration.md:100` describes
the file as "Event handlers (PreToolUse, PostToolUse, etc.)", and `agent-definition.md:53` covers
only the per-agent `hooks` field, not the plugin-level set. Treat the five names above as the ones
this repo has verified, not as the schema. Check Claude Code's own hooks documentation before wiring
an event not listed here.

## Referencing a script — use the `.apm/` path

Use `${PLUGIN_ROOT}` to reference scripts inside this plugin; the plugin runs from a cache or
`apm_modules/` path after install, not its original repo location. `${PLUGIN_ROOT}` is apm's
target-neutral token; apm rewrites it exactly as it rewrites `${CLAUDE_PLUGIN_ROOT}` — verified
byte-identical in the deployed `.claude/settings.json` with apm 0.28.0 — so prefer it, and
`factory-audit` suggests it. **Address the script at its `.apm/` path:**

```json
"command": "${PLUGIN_ROOT}/.apm/hooks/check-apm-current.sh"
```

The obvious-looking `${PLUGIN_ROOT}/hooks/check-apm-current.sh` does not work, and fails
quietly enough to be worth spelling out. apm resolves the placeholder against the installed package
root, and there is no `hooks/` directory there at all — the package's content is `.apm/`. apm prints
`Hook script not found: .../hooks/check-apm-current.sh` and then deploys the hook anyway, pointing at
a path with no file behind it.

`tests/test-apm-current-hook.sh` pins the reference so a well-meaning "simplification" back to
`hooks/` fails the suite rather than silently disabling the hook.

## Deployed shape

At install, apm merges the event bindings into `.claude/settings.json`, copies the referenced script
to `.claude/hooks/<pkg>/` (preserving its executable bit, preserving the `.apm/hooks/` subpath), and
rewrites `command` to a `${CLAUDE_PROJECT_DIR}`-relative path. Ownership of its own entries is
tracked in a `.claude/apm-hooks.json` sidecar, so an uninstall removes them without touching
hand-authored hooks. Both `.claude/hooks/` and the sidecar are gitignored install output.

Note that apm's **executable-trust gate is off** unless the consuming project's `apm.yml` has an
`executables:` block — without one, package hooks deploy with no prompt. The allow key is
version-pinned (`kyberforge#<version>`), so a version bump on one side alone stops the hook
deploying; `check-executables-allow-sync` is the pre-push gate that catches it. See ADR-0019.

## The SessionStart hook

`check-apm-current.sh` keeps an apm-consumed install level with its remote: it runs `apm outdated`,
and if anything is behind, runs `apm update --yes` and returns `reloadSkills: true` so the running
session picks up the redeployed content. Rationale, measurements, and the failure modes are in
ADR-0019.

**Where it looks for the lockfile.** The hook resolves a project directory as `${CLAUDE_PROJECT_DIR}`
when the host exports it (Claude Code does, for SessionStart hooks) and the current directory
otherwise, then exits silently unless that directory holds an `apm.lock.yaml` — which is what makes
it inert in any project that does not consume packages through apm. Both `apm` invocations run
against the same resolved directory. The earlier spelling checked a bare `apm.lock.yaml` against the
session's cwd, so a session opened in a subdirectory of an apm-consuming repo no-opped silently.
Keep the cwd fallback: a host that sets no `CLAUDE_PROJECT_DIR` must still get inert-but-harmless
behaviour, not an unset-variable error.

**The `timeout` in `hooks.json` must exceed the script's own budget.** The script spends at most
`timeout 60 apm outdated` plus `timeout 300 apm update`; the hook entry declares `timeout: 380`, the
sum plus a buffer. Set it lower and a slow remote gets the hook SIGKILLed mid-`apm update`, leaving a
partially redeployed `.claude/skills/` and emitting no notice — precisely the silent failure the hook
exists to prevent. `tests/test-apm-current-hook.sh` pins the relationship (host timeout > sum of the
script's internal timeouts) rather than the literal, so raising either side alone fails the suite.

**Staleness is detected by matching apm's summary line, and both spellings count.** `apm outdated`
has no `--json` or otherwise machine-readable output (verified against apm 0.28.0), so the hook
greps its text. apm prints `1 outdated dependency found` in the singular when exactly one package is
behind and `N outdated dependencies found` otherwise; matching only the plural silently misses a
one-package drift. Because a mocked `apm` would keep a reworded release invisible, the test suite
stages a genuinely outdated dependency against the **real** `apm` — a local git repo reached through
`url.<path>.insteadOf` rewrites, so it needs no network — and replays that genuine output through the
hook.

## GitHub Copilot CLI and Codex

**apm writes this plugin's hook for Copilot and Codex too; whether they run it is unverified.**
kyberforge's `apm.yml` declares `targets: [claude, copilot, codex]`, and `targets:` is package-wide,
so the hook reaches every target the package does
(`plugins/kyberforge/docs/research/docs/microsoft-apm/hooks-primitive-schema.md`, verified against
apm 0.28.0):

- **Copilot** gets `.github/hooks/kyberforge-hooks.json`, one file per source file. apm renames the
  event (`SessionStart` → `sessionStart`), rewrites the script path, adds `version: 1`, and otherwise
  passes the nested Claude shape through — it does **not** reshape it into Copilot's flat
  `bash`/`powershell`/`timeoutSec` form. Whether Copilot CLI executes a nested entry, or honours
  `matcher`, has not been verified.
- **Codex** gets the entry merged into `.codex/hooks.json`, but only when `.codex/` already exists;
  otherwise nothing is written.

This is accepted rather than fixed (ADR-0019, amendment 2026-09-28). The hook's behaviour is
Claude-specific anyway — the `startup` matcher, `CLAUDE_PROJECT_DIR`, and the `reloadSkills`
output — and the script exits silently without an `apm.lock.yaml`, so a harness that does run it is
unharmed. The only apm-native way to keep it Claude-only is a separate package whose `apm.yml`
declares `target: claude`; per-file target routing (`claude-hooks.json`) is deprecated, and
kyberforge cannot narrow its own `targets:` without dropping its skills from Copilot and Codex.

An earlier version of this section said Copilot loads no hooks from this plugin, because nothing
could point Copilot at a hooks file and apm did no per-target shaping. Both halves are superseded:
apm deploys the file into Copilot's hooks directory itself, and does rename events per target.

## Symlinks under `.apm/` do not survive, and nothing reports it

Do not author any file under `plugins/kyberforge/.apm/` as a symlink. apm's copy path filters
symlinks out silently: `ignore_non_content()` in `apm_cli/security/gate.py` is a
`shutil.copytree` ignore callback that drops every entry answering `is_symlink()`, commented
"Excludes symlinks (security)". The file never reaches the consumer's install, and no warning is
printed at any point.

**No gate catches this.** The pre-push check that used to read the `.apm/` tree and fail on the
offending path was deleted along with the content mirror, and the decision was taken not to replace
it (ADR-0024 consequence 7). This document is the only thing standing between a symlink and silent
content loss. No symlink exists under any `.apm/` today; add one and it is dropped on deploy with
nothing reporting it. Replace it with a regular file.

The old exemption for `.apm/<category>/<name>/tests/` no longer applies either. That directory was
exempt only because the mirror excluded it; apm deploys it like any other content (ADR-0024
consequence 2), so a symlink there loses content the same as anywhere else.